Unique, adjustable according to angle milking parlour frame with perforated manger.
Unique and multifunctional in parlour feeding frame suitable for every herring bone milking parlour (30° to 70°). A side gate that can be adjusted according to angle can be mounted onto the frame in different ways and is available in various lengths. The MultiFrame is available in left and right versions. The MultiFrame is fast and easy to install because of the few mountingpoint into the wall.
The cow-friendly MultiFrame has a curves design and has now sharp outstanding parts, which cows can be injured. It is open and does not contain any plates, which prevents any feed remnants remaining and the frame is easy to clean.
Using the MultiFrame, the perforated manger can be mounted in every (existing) milking parlour.
Always dry manger, without you as dairy farmer having to do the cleaning. Thanks to the perforated manger you no longer have to empty the trays one by one after cleaning the milking parlour. The unique feed trough has holes in the bottom and works like a colander. This ensures that any water from cleaning automatically transported away. Pellets can fall through due to the correct size of the holes.
The shape of the manger matches the nose of the cow perfectly as well as its natural way of eating. The spheroid bottom makes it easy for the cow to grab the pellets with its tongue. It ensures that the cow does not push out any pellets.
The manger is also available without a perforated bottom but with a plug. This is suitable for when dispensing powders alongside the feed concentrate.
Complete Hanskamp in-parlour design
- The PipeFeeder can be mounted simply onto the MultiFrame using two brackets, without any extra holes having to be drilled into the wall.
- Support for individual stall recognition reader The MultiFrame can be fitted with individual stall recognition for feeding in parlour. They fit all the commonly used antennae (DeLaval and Nedap).
Please read here the experience of Marco de Nood with the MultiFrame.
Please see below the video of Linda Seegers.
Design your MultiFrame & PipeFeeder at www.hanskamp.nl/configurator!