News & Events

New! Attachment sleeve PipeFeeder

This rubber attachment sleeve is the complete solution between the auger and the PipeFeeder feed. Never again experience condensation in your PipeFeeder. The sleeve has been designed so that it can be cut to the desired diameter (Ø 70, 80, 90, 100, 110 or 125 mm). The rubber attachment sleeve comes free of charge with all PipeFeeder orders. We also take separate orders. By intrest please contact your local milk equipment dealer of find your hanskamp dealers here.

Read more

New! Hanskamp Webshop

If you get back from a call-out after 17:00 but need to order a replacement part the same day, try Hanskamp's new Webshop and find the right part per category!

The webshop is only available to Hanskamp dealers. You can pay online or request an invoice. Please notice that you first have to register, before you can order. You will automatically receive an e-mail with login details if the administrator has given you access to the secure part of the website.

Read more

New! CowToilet

Hanskamp is developing a revolutionary system that will solve the ammonia problem in the dairy industry; the CowToilet. This innovative system is designed to collect a cow's urine. 

Read more about it, here

Read more

Introduction new sales member

We would like to introduce our new Field Sales colleague, Lars van Gaalen. Lars will be visiting our dealers in the UK and in Northern Germany. He is experienced in selling agricultural equipment. "I get a kick out of working with the customer to find the best solution together. I will be in the UK in late January/early February, so be sure to contact me if you would like a visit." Robin Franken will remain your in-house contact. Please contact Robin for quotes, placing orders and for any technical questions.

Read more

Brochure 2019

The new brochure of 2019 is ready. If you would like to reseive a hardcopy, please contact us and we will be happy to send it to you free of charge. 

Download the brochure here


New launched on the EuroTier fair: Spider!

The Spider is Hanskamp’s feeding system for automated concentrate feeding of individual animals either in the milking parlour of in a feed station. More information read here.

Read more

New Black-V reduces waste due to 15-gram portions

The Black-V anti-spill is now also available as a 15-gram portion dispenser. Distributing concentrate in smaller portions improves feed intake and prevents pellet spillage. With its specially programmed motor, it only turns 120⁰, while the collection tray prevents excess pellet distribution. Cows are no longer rewarded for bumping the feed station or milking robot as a result. 

The precise, small portions of pellet make the 15-gram version very suitable for goat milking parlours. The Black-V can also be expanded with a 28-litre concentrate container. The container is made of transparent plastic, making it easy to check the remaining supply at a glance.

Read more

New! Configurator

Do you have ideas for a new project but want to figure out your options on your own first? Or do you already know what you need and just want to order it quickly and easily? Meet the Hanskamp Configurator!

The Hanskamp Configurator is the online design studio for your Hanskamp solution. The Configurator offers assistance at every stage of your project, from orientation to requesting quotations and placing orders. The Configurator offers easy insight into the different designs, including pricing and 3D views. Visit to design a PipeFeeder, MultiFrame, MultiDos, FeedStation or L’port to your exact specifications!

Create an account to save your ideas, request quotations, and place your orders. The 10th, 25th and 50th account registration will win a fantastic Hanskamp package!

Read more

Ventilation for prevention of blockages

Moisture and pellets. Everyone knows that moisture and pellets are a bad combination. In damp environments such as milking parlours, concentrates easily lump together, resulting in blockages in the feed dispenser. Good ventilation prevents blockages; read our extra installation tips and learn about our latest development below.

New PipeFeeder baseplate
Constant ventilation is important for the prevention of blockages, which is why the PipeFeeder's baseplate has been improved with ventilation holes. The smart positioning of the holes prevents pellets from falling through.  The holes ensure that the dispensing nozzle stays dry at all times. Cows breathe warm air into the nozzle, which can condense and mix with the pellets, caking up inside the nozzle and causing blockages. With the new ventilation holes, the warm air is unable to condense and cause problems!

PipeFeeder installation tips

  1. Correctly configure your PipeFeeder's anti-spill functionality. The PipeFeeder is a closed system; when it is properly configured, no moisture can enter the storage. If you are experiencing moisture problems, the dispensing valve may not be set to fully closed (anti-spill) in the idle position. If the dispensing valve is open, you must remove the motor and rotate the axle to line up the triangular notch in the steel with the arrow on the motor's drive shaft (this can be done with a full storage tube). Tip! Hold the front-facing camera on your smart phone under the dispensing nozzle to see if the dispensing valve is closed properly.

  2. Install the PipeFeeder with the long edge facing the cow. If the PipeFeeder is installed the wrong way around, problems can arise from cows breathing directly into the dispensing nozzle. Always install the PipeFeeder with the long edge of the pipe facing the cow, which minimises the amount of warm breath entering the nozzle. This also allows cool air to flow behind the nozzle, which helps it dry.
  3. Use a gasketed PVC coupling between the auger and the top of the PipeFeeder. Look at where the auger connects to the PipeFeeder. Fit a gasketed PVC coupling between the auger and the top of the PipeFeeder to prevent moisture from seeping in.
  4. Do not install the PipeFeeder too deep in the feed trough; the bottom of the pipe should be 1 cm above the top of the trough. Installing the PipeFeeder too deep in the feed trough restricts air flow around the dispensing nozzle. This applies to milking parlours as well as feed stations or milking robots. Ensure a minimum of 26 cm between the PipeFeeder dispensing nozzle and the bottom of the feed trough. Tip! Slide a wooden plank between the side partitions in the feed station or milking parlour and lay it flat on top of the feed trough or troughs ). When you install your PipeFeeders, they will all be perfectly aligned at the correct height.

Read more

Reduce heat stress with MultiDos

Heat stress can be a problem for (highly productive) dairy cows at temperatures higher than 23 degrees. Cows are unable to reduce their body heat, resulting in reduced feed intake, declining milk production, and reduced resistance. Supplementary feeding with liquid supplements or health additives is a good option to optimally support your dairy cows. This is especially important when the heat coincides with starting a fresh cow. 

The MultiDos allows you to easily and automatically administer liquid supplements. Your cows are recognised by the feed station or milking robot and issued the exact amount they need. You can also gradually increase or decrease portions, which benefits the cow. MultiDos keeps your livestock in optimal condition.

Read more

Stay informed!

We are happy to keep you informed about our latest developments and innovations!

  • Hanskamp innovations
  • Unique
  • Maximum cow comfort
  • Customisation
  • Precise dosing of feed concentrate and additives
  • Well acquainted with the practice
  • Universal systems
  • Contributes to sustainable livestock farming
  • Well thought-out, sturdy, durable
  • Proven quality
  • Innovative and practical

Directly advise

Are you looking for a correct solution?

Address details

  • Hanskamp
  • Broekstraat 17
  • 7009 ZB Doetinchem
  • The Netherlands

Opening hours

  • Monday to Friday 8.00 am - 5.00 pm
  • Phone:
  • Fax:
  • E-mail: